#ULTIMAKER CURA USB SETTINGS HOW TO#
#ULTIMAKER CURA USB SETTINGS SOFTWARE#

If you don’t want to bother with Octoprint you can send GCODE direct to Snapmaker using the send to method in Bret’s post. I can also control head location/temperature and send GCODE commands directly to Snapmaker from my laptop through Octoprint.Īs the Raspberry pi is connected via USB to the Snapmaker I don’t have to get out of my chair to confirm anything on the Snapmaker screen. I get feedback on progress and can monitor progress using the camera connected to the Raspberry Pi through Octoprint. It works great and I have a camera connected to Octoprint so don’t need to move from my chair and beer to set off a print from my laptop. Cura sends prints automatically to Octoprint using the Octoprint plugin and Octorpint manages the Snapmaker. Interface with Octoprint from any computer on my network. I use a Raspberry pi connected through USB to Snapmaker running Octoprint.

I do all my slicing using Cura as it is very flexible and integrates with Fusion 360 for design. Are there suggestions or some other way to set this part up? It will only accept negative numbers for these. Is this a valid way to send the print to the snapmaker or will I ‘lose’ something loading saved gcode from Cura into Luban’s workspace?Įdit: Also when I follow the suggested settings on Snapmaker’s site for setting up on Cura, they list These values as positive, and I cannot seem to make them positive. My husband suggested I could save the gcode to a file, then load it into Luban’s workspace and wirelessly send it that way to avoid the hassle of putting the file on a usb and manually moving the file.

#ULTIMAKER CURA USB SETTINGS HOW TO#

I am wondering how to best send a print job to the snapmaker with Cura, since it is unable to connect with my printer. I’ve watched a few videos on the different settings, and have used Google magic to learn how to set the gcode and settings for my Snapmaker into Cura (I have not tested these with a print as of yet). Thus far I have used Luban so this interface is a little daunting. Additionally, warning and attention message have been redesigned with intuitive color schemes, so they are easier to understand.Today is my first time looking at Cura to use with my Snapmaker A350. When you make the Ultimaker Cura window smaller, for example, icons will adapt, resulting in less visual clutter. They also give Ultimaker Cura a sleek, modern look and feel.

These icons are designed specifically for clarity, and better represent the features with which they are associated – resulting in a simpler, more informative slicing experience. We’ve implemented more than 100 new icons throughout Ultimaker Cura and aligned them with icons used throughout the Ultimaker platform. Without our community, the last year’s growth would not have been possible, so thank you very much again! Together, we will continue to make Ultimaker Cura the best slicer possible! It’s iconic

#ULTIMAKER CURA USB SETTINGS SOFTWARE#

In the last year, our slicing software has seen tremendous, exciting growth, with 87 unique community members contributing a total of 119 new features, bug fixes, and third-party printer additions and updates.Īn astounding 15% of all contributions were provided by GitHub users SmartAvionics and fieldOfView – so special thanks to both of you for making Ultimaker Cura even stronger! Before diving into Ultimaker Cura 4.11, we want to take a moment to give a special shout-out to you – the Ultimaker Cura community.

Ultimaker cura usb settings